There is no product that matches the search criteria.
Your cart is empty.
ARC-8026 SAS Expander Module(Three 6Gb/s SAS 4x SFF-8088 ports; one host and two for expansion to additional JBOD enclosures) The Areca SAS Expander module ARC-8026 is based on the LSI LSISAS2x36/28 expander IC, SAS-2 chip which features 36/28 x 6Gb/s ports and 6G/3G multiplexing, SAS 2.0 zoning, self-configuration, table-to-table routing, and an integrated PPC processor for SES-2 and enclosure management support. The ARC-8026 expander module features three 6Gb/s SAS 4x SFF-8088 ports; one host and two for expansion to additional JBOD enclosures. It is designed to fit into a stand-alone box and can be installed in a 5.25”mounting shell. The Areca SAS expander box is ideal for enclosure customers that want to support up to 24 channels 6Gb/s and 3Gb/s SAS/SATA/SSD JBOD function units using low-cost SFF-8087 SAS cables. It has been fully tested and qualified with 6Gb/s and 3Gb/s Areca external SAS/Fibre/iSCSI/PCIe to SAS RAID controller, SAS RAID adapters and HBAs.
Box Controller ModulesExpander Board: 1 modulesSensors: 1 sensor on expander boardController External ConnectorsSAS Connectors1 x SAS “IN” connector for connection to the host2 x SAS “OUT” connector for expasion to next JBOD enclosureDrives• SAS Hot-Plug Hard DrivesUp to 12/16/24 6.0 Gb/s SAS hard drives at speed of 10K or 15K rpm• SATA Hot-Plug Hard DrivesUp to 12/16/24 6.0 Gb/s SATA hard drives at speeds of 7.2K or 10K rpmInternal Connectors3/4/6 SFF-8087 min- SAS connectors1 x 6-pin PCI-E power connector4 x 3-pin fan connector2 x 2-pin power status connector1 x 6-pin LCD connectorSerial Connector (per Expander Board)1 x 6-pin UART RJ-11 connector (for expander box manager only)LED IndicatorsInternal fault/activity header12/16/24 2.54mm activity and fault headerExternal SAS Port LED IndicatorsTwo one-color LED status indicators for each SAS host port, one for SAS port link and one for the activity statusTwo one-color LED status indicators for each SAS expansion port, one for SAS port link and one for the activity statusMonitors/IndicatorsSystem status indication through LCD, LED (Link status and Activity) and alarm buzzerEnclosure management such as two power supplies status connectors and four fan monitor/speed control connectors (Protocols SES-2 over SAS ports) readyManagementIn-band SAS portOut-of-band RS232 serial portCLI through RS232 serial portPhysicalDimension41(H) x 145(W) x 200(D) mmEnvironmentalTemperatureOperating: 10° to 40°CStorage: –40° to 70°CRelative HumidityOperating 10% to 80 (non-condensing)Storage 5% to 95% (non-condensing)Power Consumption12V @ 0.63Amps = 7.56W+5V @ 0.52Amps = 2.6W
English